19
18
<Accumulative Time Measurement>
(1) Each time the A button is pressed, the chronograph is switched between start and
stop.
(2) Press the B button to reset while the chronograph is stopped.
A
A
A
B
RESET MEASURE STOP
<Split Time Measurement>
(1) Each time the A button is pressed, the chronograph is switched between start and
stop.
(2) Press the B button while the chronograph is measuring to display the split time for
about ten seconds. (The "SPL" indicator will flash while the split time is displayed.)
Each time the B button is pressed, the newest split time is displayed.
(3) Press the B button to reset while the chronograph is stopped.
A
A
B
BB
1
RESET MEASURE
SPLIT TIME
STOP
1 : After 10 seconds, automatically returns to the measuring display.
10. Using the Chronograph <CHR>
This chronograph measures times of up to 23 hours 59 minutes 59 seconds and
99/100 seconds in units of 1/100 second. On reaching 24 hours of elapsed time, it
resets to zero (0:00' 00") and stops. It can also measure split times (intermediate
elapsed times).
<Chronograph reset display>
• About the confirmation sound
A confirmation sound will be heard when
the chronograph is started, stopped, and
at the time of split and reset operations.
Measured time
( minutes, seconds,
To Next Page
Loading...
Need help?
General
