To Next Page

To Previous Page

* While in the alarm mode you can sound the alarm continuously for as long as you

keep the A button pressed. (Alarm sound monitor function)

* When you are using the 12-hour system, the alarm time will also run according to the

12-hour system. Watch the AM/PM indicator to confirm that you have made the set-

ting you want.

* The alarm mode will automatically return to the normal display if left for about two

minutes with no input.

Press the A button while in the alarm mode to switch the alarm between on and off.

Press any button to stop the alarm while sounding.

[ ON ] [ OFF ]

9. Using the Alarm <AL1/AL2>

Setting and operation of the Alarm 1 and Alarm 2 are the same, only the sound of

the alarm is different.

Once you turn the alarm on, it will sound for 20 seconds at the same time each day.

(1) Press the M button to select the <AL1>

or <AL2> mode.

(2) Press the B button to display the time

of the city for which you want to set the

alarm.

(3) Press and hold the B button for 2 sec-

onds or more, the "hour" display will

start flashing. The flashing item can be

adjusted. Press the A button to adjust

the "hour". (If the A button is kept

pressed, the setting changes quickly.)

(4) Press the B button while the "hour" is

flashing to make the "minute" display

flash instead. Press the A button to

adjust.

(5) Press the M button to return to the nor-

mal alarm display.

Alarm

set time

City

name

Citizen C460 User Manual

Other manuals for Citizen C460