Citizen C460 - Performing an All-Reset Operation; Using the Calculating Functions

27
26
15. How to Handle the Calculating Functions
Some are not equipped with this function depending on the model.
Name of Scale • Marking
▲
▲
▲
▲
▲
▲
▲
▲
F
U
E
L
L
B
S
.
O
I
L
L
B
S
.
I
M
P
.
G
A
L
.
U
.
S
G
A
L
.
L
I
T
E
R
S
.
Speed Index
Volume-weight Conversion
(Liters/U.S. gallons/IMP.(imperial)

gallons/fuel pound/oil pound)
Fuel conversion
(Liters/U.S. gallon/ IMP. gallons)
Inner scale
outer scale
Distance Conversion
(Kilometers/miles/nautical miles)
Note the points below when using this function.
• Use the calculating functions of this watch as a guideline only.
• This scale cannot be used for position of the decimal point.
14. All-Reset Operation
(1) Pull the crown out.
(2) Press the three buttons A, B and M simultaneously. (While pressed, there will be
no display.)
(3) Release the buttons. (All the display segments will appear.)
(4) Push the crown in. (At this point, a monitor sound is heard.)
S.T.
This completes the all-reset operation. Set
each mode correctly before using the watch.