11
10
6. Setting the Analog Time
In the case of watches where the crown is a screw type, perform the operation
after loosening the screw. Make sure to tighten the screw firmly when the opera-
tion has been completed.
(1) When the second hand comes to the
0-second position, pull the crown out
to the position for time adjustment.
(2) Turn the crown to align with the correct
time.
(3) Return the crown to its normal position.
Normal position
Position for time adjustment
5. EL Illumination Function
<What is EL?>
Electroluminescence is a physical phenomenon whereby electrical voltage is di-
rectly converted into light in a thin film solid. This watch utilizes an EL panel for the
illuminating function.
<How to Light the Illumination>
The EL illumination comes on in the following situations.
(1)When the A button is pressed during the normal <TME> mode, <CAL> mode, or
<SET> mode displays.
(2) During split time display or stop in the <CHR> mode.
To Next Page
Loading...
Need help?
General
