27
Printer Operation
Setting the Media
Using the Rewinder as a Peeler
(CL-S700R models/Peeling Mode)
1. Ensure that the optional rewinder paper guide is not installed.
2. Open the rewinder cover and remove the rewinder flange.
Rewinder flange
3. Pull out approximately 40cm length of the media from the head
unit.
Media
Approx. 40cm
4. Peel off a number of labels at the tip part of the media from
the liner so that the liner unit is in contact with the peeler
roller when closing the rewinder cover.
To Next Page
Loading...
