35
Printer Operation
Mode Settings
HEX Dump Mode
When using label media
Turn on printer power while pushing the STOP key. If the POWER LED is
lit and the LCD indicates "Hex Dump Mode" and "Label Media", release
the STOP key, and then the printer enters HEX DUMP mode.
When using continuous media
Turn on printer power while pushing the STOP key. If the POWER LED is
lit and the LCD indicates "Hex Dump Mode" and "Label Media", and then
changed to "Hex Dump Mode" and "Cont. Media", release the STOP key,
and then the printer enters HEX dump mode.
DUMP LIST
Turning on the power while pressing keys in the following combinations starts
various functions.
Operation Panel (P.16)
* To exit HEX Dump Mode, turn off the power to the printer then turn the power on
again (restart).
Mode Key operation
HEX dump mode Turning power on while pushing the STOP key.
Self print mode Turning power on while pushing the FEED key.
Menu list print mode and Turning power on while pushing the MENU key.
Menu setup mode
To Next Page
Loading...
Need help?
General
