Citizen CL-S703

2
Printer Operation
34
6. Lower the head unit back down to the closed position. Push the
head close knob firmly to close and lock the mechanism. The
mechanism is only locked correctly when you head a “click”.
If the ribbon is wrinkled, push the FEED key until the wrinkles
disappear. If the wrinkles do not disappear or if it slips, perform
ribbon tension adjustment and media width adjustment. See
“Chapter 3 Printer Adjustments” for these adjustment methods.
Head close knob
[Model CL-S700/CL-S703]
Adjusting the Ribbon (p.59)
Setting the Ribbon