25
3.3 Installing & Using Battery
(1) Align battery hook as shown in the picture.
(2) Push the battery into the printer until it locks in place.
(3) To release or remove the battery, gently pull the release catch towards
the battery module and rotate the battery from the printer.
Hook
NOTE
1. As the battery is not charged at the time of your purchase, charge the battery
fully prior to using the printer.
(Batteries can be charged in the printer or optional external cradle.)
2. When used in low temperatures, the battery's operation time may decrease.
3. The full charge level for the battery will decrease with each discharge,
gradually decreasing the operation time of the battery as it is repeatedly used.
4. Even when the power is turned off, the printer battery will very gradually be
consumed.
5. If you will not be using the printer for a long period of time, remove the battery
from the printer.
6. Storing a battery with remaining charge for a long period of time may cause it
to degrade. Please drain the power from the battery completely before storing
it for long periods.
To Next Page
Loading...
Need help?
General
