6
Precautions in Handling Printer
WARNING
z
If the product continues to be used when heat or smoke is
generated or an abnormal odor is produced, a fi re may occur.
Immediately turn the printer power off, and carefully but quickly
remove the battery, then contact our service agent.
z
If any foreign matter (metal tip, water, liquid) enters the product,
immediately turn the printer power OFF, and carefully but quickly
remove the battery, then contact our service agent. Ignoring this
instruction may result in a fi re.
CAUTION
z
This equipment is not suitable for use in locations where children
are likely to be present.
z
Do not place the printer on a shaky table or other unbalanced
place. The printer may drop or fall resulting in injury.
z
Avoid using or storing in the following place. Damage to printer
may be caused.
• In a car parked in a sunny place, a place exposed to direct sunlight,
near heat generating equipment, or the like.
• A place where temperature or humidity is excessively high or low, or
its change is radical.
• A dusty place.
• A place likely to get a splash of water or liquid.
z
Avoid dropping, impacting or vibrating the printer otherwise
damage may be caused.
z
Avoid entry of foreign material. Otherwise, fault may occur.
z
Do not use volatile liquid (thinner, benzine, etc.) or wet cloth when
cleaning the printer. Deterioration or discoloration may occur. Use
a dry, soft cloth for cleaning.
z
Do not move the printer or give any shock or vibration to it while
the printer is in operation or in standby operation. The printer
power may be disconnected and the print data may be lost.
To Next Page
Loading...
Need help?
General
