49
Sub Menu Menu items Options Description
DHCP
Enabled*/Disabled
DHCP makes it possible to
automatically receive networking
information, such as IP address.
Power Mode
Continuous Awake
Mode*/Power Save
Protocol
This option sets the power mode.
If you want to save battery
consumption, select “Power Save
Protocol”.
Display Status — You can check the currently set
network information. Pressing the UP
(
) or Paper Feed/Down ( ) buttons
allows you to switch the display
screen to the next/previous page.
Print Status — The network IP address can be
checked.
UTILITIES menu
Sub Menu Menu items Options Description
Test Prints Test Label — Test label is printed by pressing the
Enter (
) button.
Test Receipt — Test receipt is printed by pressing the
Enter (
) button.
Checkerboard — Checkerboard pattern is printed by
pressing the Enter (
) button.
Grey Scale — Gray Scale pattern is printed by
pressing the Enter (
) button.
Conguration
Print
— Currentprintercongurationis
printed by pressing the Enter (
)
button.
Sensors &
Switches
Black Mark — A/D value of the Black Mark sensor is
displayed.
Peel — A/D value of the Gap sensor is
displayed.
Gap — A/D value of the Peeler sensor is
displayed.
Peeler Switch — A/D value of the Peeler Switch sensor
is displayed.
Distance Counter Print Counter — You can view total inches printed.
Service Counter — You can view current service counter.
Reset Service
Counter
Reset/Cancel You can reset service counter by
selecting “Reset”.
V10 CONSUMIBLES S.L.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
To Next Page
Loading...
Need help?
General
