—23—
LED Functions
The tables below explain how to interpret LED indications.
1. Network transmission speed
2. Network status
Changing network settings
You can use a web browser to access a special settings page to check and change
board settings.
Accessing the special settings page
1. Use a web browser to access the URL of the special settings page. Specify the IP
address assigned to the printer as the URL. (Example: For an IP address of
169.254.1.10, input: http://169.254.1.10.)
Transmission speed LED (green)
100Mbps Lit
10Mbps/Not connected Unlit
Status LED (yellow)
Connected Lit
Not connected Unlit
Data transmission in
progress
Flashing
To Next Page
Loading...
