—40—
The status display for various messages is shown below.
Notes:
*1: Buzzer sounds when MSW5-1 (buzzer setting) is set to ON.
*2: MSW10-5 (buzzer event) can be configured to disable the buzzer.
*3: Indicated when a cover is opened during standby.
*4: Indicated when a cover is opened during standby.
Status PAPER LED CUTTER LED COVER LED
SERVICE LED Buzzer
*1
Paper near-end Unlit Unlit Unlit —
Paper-end Lit Unlit Unlit Unlit Yes
*2
Cover open*3 Unlit Unlit Lit Unlit Yes*2
Cover open II*4 Unlit Unlit Unlit Yes
Cutter locked Unlit Unlit Unlit Yes
Low-voltage error Unlit Yes
Low-voltage error II Unlit Unlit Unlit Yes
High-voltage error Unlit Unlit Unlit Yes
System error Unlit Unlit Unlit Yes
Memory error Unlit Unlit Unlit Yes
Print head hot Unlit —
Waiting for macro to
execute
Unlit —
To Next Page
Loading...
