Citizen CT-S651 Series

CT-S651 Series Service Manual
- 30 -
2-2-9. Low Voltage Error
If the power supplied to the printer drops to 16 V or below, operation will stop. In this case, shut down the
printer immediately.
2-2-10. High Voltage Error
If the power supplied to the printer becomes 27 V or above, operation will stop. In this case, shut down the
printer immediately.
2-2-11. Drawer Voltage Error
If the cash drawer drive power is overloaded by any reason (cash drawer fault, connection of external device
other than cash drawer, contamination, etc.) an error will be detected and the cash drawer drive power will be
shut down. In this case, shut down the printer immediately.
2-2-12. Macro Execution Wait
When the ESC/POS command is specified, the macro execution wait state will take effect. The macro will be
executed when the switch is pressed or when a specified time has elapsed.