CT-S651 Series Service Manual
- 24 -
1-4. Oiling
1) Oil Used (Grease)
• FLOIL G311S (Kanto Kasei)
• Daphne Eponex Grease No. 2 (Idemitsu)
2) Oiling Positions
<FLOIL G311S>
(1) Shaft at “COVER GEAR”
(2) Shafts at “SHAFT, PAPER HOLDER” (4 positions)
* Apply oil to the “HOLDER PAPER” side.
(3) Hinge holes at “SA, COVER FRAME”, mating section with “LEVER R, L COVER LOCK”
(two positions at the right and left)