Citizen CT-S651 Series

CT-S651 Series Service Manual
- 23 -
17. Disassembling “LEVER, COVER OPEN-02”
Press down “LEVER, COVER OPEN-02”, align it with the slot at “SA, MAIN FRAME”, and pull it out
toward you.
18. Disassembling “LEVER, INTERLOCK SENSOR-02”
Remove “SCREW, PH (PW), M2.0 × 8” that fastens “LEVER, INTERLOCK SENSOR-02” and “SA, MAIN
FRAME”.
<Precaution at disassembly / reassembly>
The screw is locked with “NUT, M2”. Be careful not to loose it.
The shaft of “SHAFT, INTERLOCK SENSOR” is specially shaped to prevent it from rotating. When
reassembling, align “SHAFT, INTERLOCK SENSOR” with the hole at “SA, FRAME, MAIN”.
Check the orientation of “SPRING INTERLOCK-02” and the mounting position of “SA, MAIN FRAME”.
1-3. Assembly Procedure
When reassembling the parts, follow the procedure of “1-2 Disassembly Procedure” in reverse.
SCREW, PH (PW), M2.0 × 8
Position of “SPRING
INTERLOCK-02”
Check the
mounting status.
NUT, M2
Position of “SPRING
INTERLOCK-02”