14
[How to fit hands]
Before fitting the hands, perform the all-reset operation and then start the 1-second interval
movement.
1. Perform the "all-reset" operation.
q Pull the crown to the second click and press and hold the (A) button (the switch spring in
the 2-o'clock division) for 2 seconds or longer.
2. Perform the "standard position setting".
q Pull the crown to the second click and turn it to the right or left.
w Pull the crown to the first click and turn it to the right or left.
e Return the crown to the normal position.
r Pull the crown to the second click and return it to the normal position again, and the watch
starts the 1-second interval movement.
3. Fit each hand.
• Fit the "hour hand" before the 12-o'clock division and pull the crown to the second click and
turn it to the right to set the hour hand to the 12-o'clock division.
• Fit the "minute hand" to the 12-o'clock division.
• Fit the "second hand" to the 12-o'clock division.
4. Set the movement in the case and perform the "all-reset" operation and "standard position set-
ting" again, then set the time and calendar correctly.
To Next Page
Loading...
