77
<Time Correction Procedure>
Step 1) Pull the crown out to Position 2.
· The second hand rapidly moves to the 0 seconds position and stops.
Step 2) Turn the crown to set the minute hand.
① Turning the crown to the right (by 1 click) causes the second hand to make one revolution
in the clockwise direction and the minute hand to advance by 1 minute.
② Turning the crown to the left (by 1 click) causes the second hand to make one revolution
in the counter-clockwise direction and the minute hand to go back by 1 minute.
• Continuously turning the crown (by 2 clicks or more) causes the second and minute hands to
move continuously by one hour.
• Turn the crown to the left or right to interrupt continuous movement of the hands.
Step 3) Press button (A) once and turn the crown to set the hour hand.
① Turning the crown to the right (by 1 click) causes the hour hand to rotate in the clockwise
direction and advance by 1 hour.
② Turning the crown to the left (by 1 click) causes the hour hand to rotate in the counter-
clockwise direction and go back by 1 hour.
• Continuously turning the crown (by 2 clicks or more) causes hour hand to move continuously.
[NOTE] The d
ate changes at 12:00 AM. Please pay attention to AM and PM.
Step 4) Return the crown to the normal position (0) jin synchronization with a
telephone time signal or other time service to finish the procedure.
To Next Page
Loading...
Need help?
General
