81
● This function lets you set a time difference in 1 hour units for the local time when
traveling to a region or country in a different time zone.
Step 1) Press button (B) once. The second hand
indicates the time difference. The zero
seconds position of the second hand
indicates a time difference of ±0 hours.
Step 2) Turning the crown (by 1 click) to the right
without pulling it out causes the second
hand to advance by 1 hour in a single
step. Turning the crown to the left
causes the second hand to go back by 1
hour in a single step.
• The second hand indicates Japan standard time at
the 0 seconds position. The time difference can be
set to ±27 hours based on Japan standard time.
Step 3) After setting the time difference, the setting mode is canceled and the
second hand returns to 1-second interval movement either when button (B)
is pressed once or when none of the buttons are pressed for 10 seconds.
8. Time difference correction procedure
−5
±0
− 10
− 27
＋5
＋ 10
＋ 27
Button (B)
To Next Page
Loading...
Need help?
General
