80
Step 2) Turn the crown to set the date.
① Turning the crown to the right (by 1 click) advances the date by 1 day.
② Turning the crown to the left (by 1 click) moves the date back by 1 day.
[NOTE] Pay attention to AM and PM when setting the date. Refer to
"6. Setting the Time".
Step 3) Press button (A) once and turn the crown to set the month and elapsed
year.
① Turn the crown to the right (by 1 click) to align the second hand at the position
corresponding to the month and elapsed year.
② Turning the crown to the left (by 1 click) causes the second hand to move
backward.
◎ The operation for correcting the date, month and elapsed year can be switched by
pressing button (A) once. The date wheel or second hand being corrected at that time
moves to the left and right to indicate that the watch has entered the correction mode.
Step 4) Return the crown to the normal position (0) to finish the procedure.
To Next Page
Loading...
Need help?
General
