82
What is the Automatic Hand Correction Function ?
(Hand Reference Position Automatic Correction Function)
This function checks the hand positions at predetermined intervals to determine if
the hand reference positions are correct, and if they are detected to have shifted out
of position, rapidly corrects the second and minute hands to keep the correct time.
Shock Detection Function
This function prevents the second and minute hands from shifting when the watch is
subjected to shocks.
If the watch should happen to be subjected to a strong impact or placed in an
environment subjected to magnetism or static electricity, the correct time may not be
displayed even if radio waves are received. If this happens, check the reference position.
Refer to "10. Checking the Reference Position" on the following page.
9. Automatic Hand Correction Function
(Hand Reference Position Automatic Correction Function)
Checking and Correcting the Reference Position
To Next Page
Loading...
Need help?
General
