10
Checking the power reserve
1. Ensure that the crown is in position .
2. Press the lower right button
briefly.
The second hand moves to indicate the power reserve.
The second hand
indicates “OK” or “NO”
The watch is sufficiently charged.
The second hand rotates
counterclockwise, then
indicates “OK” or “NO”
The charge of the watch is low.
Charge the watch. See pages
32
to
37
.
• “OK” and “NO” indicate the reception result of the time
signal and no relationship to the power reserve.
3. Press the lower right button briefly to finish the
procedure.
The current time is indicated.
• The current time will be indicated automatically after 10
seconds even without pressing the button.
EN_H145[DOM]-f.indd Sec1:10EN H145[DOM]-f.indd Sec1:10 11.3.29 5:17:32 PM11.3.29 5:17:32 PM
To Next Page
Loading...
