Citizen H145 - Checking the time signal reception

11
Checking the time signal reception
1. Ensure that the crown is in position .
2. Press the lower right button
briefly.
The second hand indicates the
reception result.
OK
Reception has succeeded.
NO
Reception has failed.
When reception has failed, see page
22
.
3. Press the lower right button
briefly to finish the procedure.
The current time is indicated.
• The current time will be indicated automatically after 10
seconds even without pressing the button.
When reception
has succeeded
EN_H145[DOM]-f.indd Sec1:11EN H145[DOM]-f.indd Sec1:11 11.3.29 5:17:32 PM11.3.29 5:17:32 PM