42
Checking and correcting the current reference position
If the time or date is not shown correctly even after proper reception of the time signal, check
whether the reference position is correct or not.
What is the reference position?
The base position for all the hands to indicate
the time and date.
• For the time indication: “0:00:00”
• For the date indication: “1”
If the time and date indications are off from the
correct reference position, the watch will not
indicate the time and date correctly.
Correct reference position
EN_H145[DOM]-f.indd Sec1:42EN H145[DOM]-f.indd Sec1:42 11.3.29 5:17:39 PM11.3.29 5:17:39 PM
To Next Page
Loading...
