43
1. Pull the crown out to position .
2. Press and hold the upper right button for five or more
seconds.
All hands and the date indicator move to indicate the current
reference position.
• No operations are available while the hands and date
indicator are moving.
Reference position Next operation
Correct
Push the crown in to position
to
finish the procedure.
(You do not need to correct the
reference position.)
Incorrect Correct the reference position.
(Proceed to step 3 on page
44
.)
Continued on the next page
Checking and correcting the current reference position
EN_H145[DOM]-f.indd Sec1:43EN H145[DOM]-f.indd Sec1:43 11.3.29 5:17:39 PM11.3.29 5:17:39 PM
To Next Page
Loading...
