28
1. Pull the crown out to position .
2. Rotate the crown to change the setting.
To show Summer Time:
Rotate the crown to the right to select “ON.”
To show the standard time:
Rotate the crown to the left to select “OFF.”
• If you show the standard time manually, the watch will not
show Summer Time when receiving the time signal. See
page
30
.
3. Push the crown in to position to finish the procedure.
Changing the time to show
Switching Summer Time and standard time
EN_H145[DOM]-f.indd Sec1:28EN H145[DOM]-f.indd Sec1:28 11.3.29 5:17:37 PM11.3.29 5:17:37 PM
To Next Page
Loading...
