Citizen iDP-562 Series

iDP-562 User’s Manual
CITIZEN 26
8. Initial Setting
Followings are automatically set after Power-on or depressing SEL switch (After ALARM condition).
1. A printer head returns to its home position.
2. Printer becomes SELECT (ON-LINE) condition. (*1)
3. Print buffer function is cleared.
4. Standard character mode is set.
5. 66 per lines per page is set.
6. The first line is set at the present line.
7. Designation of reverse and red printing is cleared.
8. For 7 BIT DATA, character code of SI is applied.
*1.
Printer becomes DESELECT (OFF-LINE) condition. (Model iDP-562-PSL2 type only.)