Citizen Perpetual Calendar BL5250-02L - Chronograph Measurement; Time Difference Correction Procedure; 12 Setting Local Time

36 37
[Chronograph Measurement]
1. Turn the crown to set the mode hand to the chronograph [CHR] mode.
2. Press button (A) to start and stop the chronograph. A confirmation tone is
heard whenever button (A) is pressed.
3. Continuously pressing button (A) when the chronograph is stopped causes the
chronograph second hand and chronograph minute hand to be reset to the 0
position.
Reset Measurement Stop
(A) Pressed continuously
(A)
(A)
(A)
12. Setting Local Time
The local time function allows the time in a different time zone to be set separate-
ly from the current time. Local time is set by performing a time difference correc-
tion in 1 hour units based on the current time (time of the time mode/TME). The
minute and second hands move in coordination with the current time.
[Time Difference Correction Procedure]
1. Turn the crown to set the mode hand to the
local time [L-TM] mode.
2. Pull out the crown to Position 2 (local time
setting position).
3. Click the crown to the right or left to cor-
rect the time difference.
• When the crown is clicked to the right, the
hour hand moves by 1 hour in the clock-
wise direction.
• When the crown is clicked to the left, the
hour hand moves by 1 hour in the counter-
clockwise direction.
A
L
M
L
-
T
M
L
-
T
M
C
H
R
T
M
E
T
M
E
C
H
R
A
L
M
24
18
12
6
.0
.8 .2
.4.6
A
L
A
R
M
O
N
O
F
F
W
A
R
N
I
N
G
S
E
T
S
T
O
P
C
H
A
R
G
E
7
(2)
Local time setting position