Citizen Perpetual Calendar BL5250-02L - 13 Using the Alarm

38 39
Note: The hour hand is not advanced rapidly even if the crown is continuously
clicked two or more times. Perform correction accurately 1 hour at a
time. Furthermore, the range of time difference correction is ±23 hours
based on the current time.
4. Always make sure to return the crown to the normal position after correcting
the time difference.
Note: If the hour hand passes 12:00 AM (midnight) during correction, the date
is advanced by 1 day following completion of hand movement. If the
time difference is corrected in the counter-clockwise direction and the
hour hand passes back over 12:00 AM, although the date is corrected fol-
lowing completion of hand movement, since the date is corrected by 30
days in the clockwise direction, it takes about 2-3 minutes for the date to
be corrected. Pay attention to AM and PM when correcting time differ-
ence.
Note: When returning the time difference to the original setting, return the hour
hand in the direction opposite that when the time difference was correct-
ed.
13. Using the Alarm
The alarm function uses a 24-hour clock. Once the alarm has been set, the alarm
sounds for 15 seconds when the set time is reached once a day. The time at which
the alarm sounds applies to the time (TME) mode, and cannot be set based on the
local time (L-TM).
[Setting the Alarm Time]
1. Turn the crown and set the mode hand to
the alarm [ALM] mode.
• Second hand: Moves rapidly to the ON or
OFF position.
• 24 hour hand, hour hand, minute hand:
Move the previously set alarm time.
• Function hand: Stops at the 0 position.
2. Pull out the crown to Position 2 (alarm set-
ting position).
• The alarm setting is turned ON automati-
cally.
A
L
M
L
-
T
M
L
-
T
M
C
H
R
T
M
E
T
M
E
C
H
R
A
L
M
24
18
12
6
.0
.8 .2
.4.6
A
L
A
R
M
O
N
O
F
F
W
A
R
N
I
N
G
S
E
T
S
T
O
P
C
H
A
R
G
E
7
(2)
Alarm setting position
(A)
(B)