40 41
3. Click (turn) the crown to set the alarm time.
(1) Clicking once to the right causes the hour and minute hands to move clock-
wise.
(2) Clicking once to the left causes the hour and minute hands to move counter-
clockwise.
• Turning the crown rapidly (continuously clicking two or more times) causes
the hands to advance rapidly. When stopping the hands, click the crown
once to the right or left. When the hands are not stopped manually, they stop
automatically after being corrected by 12 hours.
• Set the alarm while making sure to not to mistake AM and PM by referring
to the 24 hour hand.
4. Return the crown to the normal position after setting the alarm time.
[Switching Alarm ON and OFF]
The alarm is switched ON and OFF each time button (A) is pressed when the
crown is pulled out to Position 1 or Position 2 in the alarm mode.
[Alarm Tone Monitor]
When button (A) is pressed with the crown in the normal position in the alarm
mode, the alarm tone sounds for as long as button (A) is pressed.
[Stopping the Alarm Tone]
Press either button (A) or (B) to stop the alarm tone while it is sounding.
To Next Page
Loading...
