Citizen YF20 User Manual

11/19
YF20 instruction manual
Executing settings for functions and assigning them to the
buttons of the watch
You can assign various functions to the lower right button
A
and the upper right
button
C
of the watch. Some functions need setting on the dedicated app.
1
Start the dedicated app.
The watch and the smartphone are connected.
• If you have not signed up, sign up.
• If synchronization of the watch and the smartphone starts, wait until it is
finished.
2
Tap the picture of the connected watch on the home screen.
The [MY WATCH] screen is opened.
3
Swipe left on the [MY WATCH] screen to indicate [PUSHER].
The function list is appeared on the tab on the bottom of the screen.
Tap this when you
assign a function
to the upper right
button
C
.
Tap this when you
assign a function
to the lower right
button
A
.
Function list
It can be scrolled up
and down.
• The example above shows when the upper right button
C
is tapped.
4
Tap the button which you want to assign a function to and tap a function
on the bottom of the screen.
• Items shown on the function list may differ depending on status of the watch.
[ADD FEATURES]
Use this to assign an iiidea of Riiiver to a button as a
function.
Function setting: Turn on iiideas on [IIIDEA LIST]
and execute required settings to make iiideas of Riiiver
appear on the bottom of the screen.
• Riiiver and iiideas are not shown on the list in places
where the Riiiver service is not available. Even after
assigning an iiidea, it is not shown in places where
the Riiiver service is not provided.
[WORKOUT MODE]
It measures your exercise and indicates its result for
each exercise type.
Results of your exercise are indicated on the screen of
the app.
[WELLNESS
DASHBOARD]
It indicates [STEPS], [ACTIVE MINUTES (MINS)],
[ACTIVE CALORIES (CALS)], [HEART RATE
(RESTING)] and [SLEEP (HRS MINS)] of a day.
It measures your heart rate.
[STOPWATCH]
It provides stopwatch measurement.
The minute hand overlaps the hour hand and they
moves to indicate seconds.
[NOTIFICATIONS]
It indicates notifications.
Function setting: it is required to execute settings
for notifications on [Notifications] on the [MY
PREFERENCES] screen.
[MUSIC CONTROL]
You can control music playback through the watch
while using the music app: can command play/pause/go
previous/go next.
Play/pause: Press and hold the upper right button
C
of
the watch.
Volume up: press the upper right button
C
once.
Volume down: press the lower right button
A
once.
Back to the previous tune: Press and hold the lower
right button
A
.
[TIMER]
It provides a countdown timer.
The minute hand overlaps the hour hand and they
moves counterclockwise to countdown seconds.
You can set countdown time in 1-minute increments.
The watch vibrates when time is up.
Function setting: countdown time must be changed on
the watch itself.
[WEATHER]
It indicates weather reports of up to two places
including current one.
Function setting: choose places on [ADD LOCATION].
• Permission for access to the positional information
of your smartphone is needed.
[RING PHONE]
It makes your smartphone emit sound to help you when
looking for the phone. To stop emitting sound, press
the middle right button
B
of the watch.

Citizen YF20 Specifications

General

Brand	Citizen
Model	YF20
Category	Watch
Language	English