27
In the event of a breakdown
8
Changing a wheel
The vehicle is not equipped with on-board tools,
such as a jack or wheel brace.
In the event of a at tyre, call a dealer or
qualied workshop.
To have winter tyres tted or the wheels
changed, consult a dealer or qualied workshop.
Changing a bulb
Cleaning
The headlamps have polycarbonate
lenses with a protective coating:
– Do not clean them with a dry or abrasive
cloth, nor with detergent or solvent
products.
– Use a sponge and soapy water or a pH
neutral product.
– When using a jet of water to clean o
persistent marks, do not keep the jet directed
towards the headlamps, lamps or their
edges for too long, so as not to damage their
protective coating and seals.
Light-emitting diodes (LEDs)
Do not touch LED headlamps/lamps.
To replace this type of bulb, you must consult
a dealer or qualied workshop.
Direction indicators
Rapid ashing of the indicator lamp for a
direction indicator (left or right) indicates that
one of the bulbs on the corresponding side
has failed.
Front lamps
1. Direction indicators
2. Sidelamps
3. Dipped beam headlamps
Rear lamps
1. Direction indicators
2. Sidelamps
3. Brake lamps
4. Number plate lamp