117
INJECTION
SAFETY REQUIREMENTS : HDi DIRECT INJECTION SYSTEM
Engines : 8HX - 8HW - 8HY - 8HV
CLEANLINESS REQUIREMENTS.
Preliminary operations
IMPERATIVE : The technician should wear clean overalls.
Before working on the injection system, it may be necessary to clean the apertures of the following sensitive components :
(refer to corresponding procedures).
- Fuel filter.
- High pressure fuel pump.
- Third piston deactivator.
- High pressure regulator.
- High pressure sensor.
- High pressure fuel injection common rail.
- High pressure fuel pipes
IMPERATIVE : After dismantling, immediately block the apertures of the sensitive components with plugs, to avoid the entry of
impurities.
Work area.
- The work area must be clean and free of clutter.
- Components being worked on must be protected from dust contamination.
To Next Page
Loading...
