BRAKE
200
BRAKE SPECIFICATIONS
(7) Hydraulic block
Elements
Electronic
ABS MK 60
ECU
7
ESP ABS
MK 60
Front wheel
5
TEVES
96 387 201 80
sensor.
Rear wheel
sensor.
96 385 307 80
Hub
4 SNR
bearing.
ABS MK.60
Hydraulic
96 394 937 80
block.
7 TEVES
ESP ABS MK 60
96 418 772 80
Ref. Supplier
Part No.
Observations
B3FP12XC
47 way connector.
Alone on the hydraulic block..
Changing only the ECU is prohibited.
2 way blue connector.
The sensors are inductive-type.
Mounted on the pivot.
Non-adjustable airgap: 0,16 to 1,6 mm.
Tightening torque: 0,8 ± 0,2 m.daN
2 way blue connector.
The sensors are inductive-type.
Mounted on the suspension arm.
Non-adjustable airgap: 0,35 to 1,6 mm.
Tightening torque: 0,8 ± 0,2 m.daN
Hub equipped with a bearing with an integral
magnetic wheel (48 pairs of poles).
Installed on the front LH chassis member
4 adjustment channels
To Next Page
Loading...
