49
ENGINE
CYLINDER HEAD
Engines : 8HY - 8HV
Cylinder head tightening (m.daN) Cylinder head bolts
X = MAXIMUM reusable length
Pre-tightening : 2 ± 0.2
Tightening : 4 ± 0.5
Angular tightening : 230 ° ± 5°
(In the order 1 to 10)
NOTE :
- The bolts should have been
thoroughly cleaned and dried
with a dry metal brush.
- Oil the threads and under the
heads of the bolts. (Use engine
oil or Molykote G Rapid Plus).
- Pass a tap into the holes in the
cylinder block.
8HY - 8HV
8HY - 8HV
X = 149 mm
B1DP1CLC
B1DP1DBC
NOTE : Retightening of the cylinder head
after a completed repair is prohibited.
The cylinder head gasket is dry-fitted.
ENGINE
To Next Page
Loading...
