192
Practical information
E3_en_Chap09_info_pratiques_ed01-2014
Direction indicator side
repeaters
F Insert a screwdriver in the edge of the
repeater.
F Lever with the screwdriver to extract the
repeater and pull it out.
F Disconnect the wiring from the repeater.
F Replace the module.
To obtain a new module, contact a CITROËN
dealer or a qualified workshop.
To refit, carry out these operations in reverse
order.
While removing the module:
- take care not to damage your
vehicle's paintwork with the
screwdriver,
- do not allow the wiring and
connector to slip behind the wing.
If you experience any difficulty in
replacing these lamps, you can contact
a CITROËN dealer or a qualified
workshop.
To Next Page
Loading...
