87
5
Driving
E3_en_Chap05_conduite_ed01-2014
Parking brake
Application Release
When parking on a slope, direct your
wheels against the kerb, apply the
parking brake, engage a gear and
switch off the ignition.
When the vehicle is being driven,
if this warning lamp and the STOP
warning lamp come on, accompanied
by an audible signal and a message
in the screen, this indicates that the
parking brake is still on or has not
been fully released.
F Pull the parking brake lever up to
immobilise your vehicle.
F Pull the parking brake lever up slightly,
press the release button, then lower the
lever fully.
To Next Page
Loading...
