224
Checks
E3_en_Chap10_verifications_ed01-2014
Coolant level
The coolant level should be close
to the "MAX" mark but should never
exceed it.
In addition, as the cooling system is
pressurised, wait at least one hour after
switching off the engine before carrying out any
work.
To avoid any risk of scalding, unscrew the cap
by two turns to allow the pressure to drop.
When the pressure has dropped, remove the
cap and top up the level.
Changing the coolant
The coolant does not have to be replaced at
routine services.
The brake fluid level should be close
to the "MAX" mark. If it is not, check
the brake pad wear.
Brake fluid level
Changing the uid
Refer to the maintenance and warranty guide
for details of the interval for this operation.
Fluid specication
The brake fluid must conform to the
manufacturer's recommendations.
The cooling fan may start after switching
off the engine: take care with articles and
clothing that might become caught by the
fan blades.
When the engine is warm, the temperature of
the coolant is regulated by the fan.
Fluid specication
The coolant must conform to the
manufacturer's recommendations.