EasyManua.ls Logo

CITROEN C5 2013 - Full Release of the Parking Brake Is Confirmed by; Activation;Deactivation of the Automatic Functions

CITROEN C5 2013
315 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
124
9
D R I V I N G
Release
The electronic parking brake releases
automatically and progressively
when you press the accelerator:
with a manual gearbox (fi rst
gear or reverse gear engaged),
press down fully on the clutch
pedal then press on the accel-
erator pedal and move off.
with an automatic gearbox , ac-
celerate with the selector in posi-
tion D , M or R .
Full release of the parking brake is
confi rmed by:
- the extinction of warning
lamp P on control A and
on the instrument panel,
- the display of a message "park-
ing brake released" on the instru-
ment panel display.
When stationary, with the engine
running, do not press the accelera-
tor pedal unnecessarily (particularly
when starting the engine, including
in neutral), as you may release the
parking brake.
Activation/Deactivation of the
automatic functions
The automatic application when the
engine is switched off and the au-
tomatic release when you press
the accelerator can be deactivated.
Activation/deactivation is performed
using the confi guration menu of the
instrument panel display. To do so,
select "Personalisation/Confi guration/
De ne the Vehicle parameters/Driving
assistance/Automatic handbrake".
The deactivation of these
functions is confi rmed by the
lighting of this warning lamp
on the instrument panel.
With the automatic functions deacti-
vated, the application and release of
the parking brake are done manually.
The deactivation of the
automatic functions is rec-
ommended in particularly
cold conditions (ice) and
during towing (breakdown,
caravan...).
Manual operation
Manual application/release of the
parking brake is always possible.
Application
With the vehicle stationary, to apply
the parking brake whether the engine
is running or off, pull on control A .
The application of the parking brake
is confi rmed by:
-
the lighting of the warning lamp
on control A and of warning
lamp P on the instrument panel,
- the display of a message "park-
ing brake applied" on the instru-
ment panel display.
When the driver’s door is
opened with the engine run-
ning, a beep is heard and
a message displayed if the parking
brake has not been applied.

Table of Contents

Related product manuals