M U L T I F U N C T I O N D I S P L A Y S
Adjusting the brightness and
contrast
Press on A .
Use C to select the "Brightness -
video adjustment" menu. Confi rm
with a press on C on the steering
wheel or D on the audio equip-
ment.
Select the confi guration of the
screen using C . Confi rm with a
press on C on the steering wheel
or D on the audio equipment.
Select the brightness setting.
Confi rm with a press on C on the
steering wheel or D on the audio
equipment.
Select the inverse or normal dis-
play mode using C then validate
with a press on C on the steering
wheel or D on the audio equip-
ment. To adjust the brightness
select "+" or "-" and save your
setting with a press on C .
Validate with "OK" on the
screen.
Adjusting the date and the
time
Press on A .
Use C to select the "Adjusting
the date and time" menu, then
confi rm your choice with a press
on C on the steering wheel or D
on the audio equipment.
Select the screen confi guration
using C . Confi rm with a press on
C on the steering wheel or D on
the audio equipment.
Select the adjustment for the
date and the time, using B .
Confi rm with a press on C on the
steering wheel or D on the audio
equipment.
Press C to select the values you
wish to modify. Confi rm your
choice with a press on C on the
steering wheel or D on the audio
equipment.
Validate with "OK" on the screen.
Choosing the units
Press on A .
Use C to select the "Choice of
temperature units" menu, then
confi rm your choice with a press
on C on the steering wheel or D
on the audio equipment.
Using C , select the unit then val-
idate with a press on C on the
steering wheel or D on the audio
equipment.
Validate with "OK" on the
screen.
Selection of the type of
information displayed (Mode)
Successive presses on the end of
the wiper stalk or on the MODE but-
ton on the audio equipment permit
selection of the type of informa-
tion presented on the multifunction
screen (date or radio, CD, MP3 CD,
CD changer).
To Next Page
Loading...
