P R A C T I C A L I N F O R M A T I O N
Access to the spare wheel
To remove the spare wheel
Lift up the boot fl oor using the
strap (Saloon) or the retractable
handle (Tourer).
Fold back the boot carpet
(Saloon).
Attach the hook to the upper sec-
tion of the boot (in the middle of
the boot pillar).
Detach the strap then push the
wheel forwards so as to be able
to lift it.
To reposition the spare wheel
Position the spare wheel fl at in
the boot, then pull it towards
you.
Next place the toolbox inside the
wheel, then secure the assembly
with the belt.
Release the strap to return the
boot fl oor to its initial position.
The tyre pressure is indi-
cated on the label located
on the left-hand door centre
pillar. On this label, the pressures
are specifi ed, according to the
vehicle load.
To Next Page
Loading...
