7
185
Practical information
F Remove the protective cover from the
towball.
F Attach the trailer to the towball.
F Attach the cable on the trailer to the safety
eye 4 on the carrier.
F Lower the connection socket 3 to put it in
position.
F Insert the trailer plug and give it a quarter
turn to connect it to the connection socket
3 of the carrier.
Removing the towball
F Give a quarter turn to and pull the trailer
plug to disconnect it from the connection
socket 3 of the carrier.
F Raise the connection socket 3 to the right
again to stow it away.
F Detach the cable on the trailer from the
safety eye 4 on the carrier.
F Detach the trailer from the towball.
F Refit the protective cover to the towball.
F Remove the cap from the lock and press it
onto the head of the key.
F Extract the towball from the bottom of its
carrier 1.
F Release the wheel; this automatically stops
in the unlocked position (position B).
F Insert the key into the lock 7.
F Open the lock using the key.
F Hold the towball 5 firmly in one hand; using
the other hand, pull and turn the wheel
6 fully in a clockwise direction; do not
release the wheel.
Maintenance
Correct operation is only possible if the towball
and its carrier are kept clean.
Before cleaning the vehicle with a high-
pressure jet wash, the towball must be removed
and the protective plug fitted to the carrier.
Apply the label provided to a clearly visible
area, close to the carrier or in the boot.
Go to a CITROËN dealer or a qualified
workshop for any work on the towbar
system.
F Refit the protective plug 2 to the carrier 1.
F Carefully stow the towball in its bag away
from knocks and dirt.
To Next Page
Loading...
