3
55
Ease of use and comfort
Adjusting the angle
'Four-way' adjustment model
Downwards:
F press and hold button B and push the head
restraint down to the desired position.
F press and hold button B and push the
lower part of the head restraint forwards or
backwards.
Removing a head restraint
F Press the lug(s) A (depending on version)
to unlock the head restraint and remove it
completely,
F Stow the head restraint securely.
Retting a head restraint
F Introduce the head restraint rods into the
guides in the seat backrest.
F Push the head restraint down as far as it will
go.
F Press the lug(s) A (depending on version) to
release the head restraint and push it down.
F Adjust the height of the head restraint.
Never drive with the head restraints
removed; they should be in place and
correctly adjusted for the occupant of the
seat.
Manually-adjusted seats
F Pull the head restraint up as far as it will go.
Longitudinal
F Raise the control bar and slide the seat
forwards or backwards.
F Turn the knob forwards or rearwards.
Lumbar support
(driver only)
F Turn the knob forwards or backwards to
obtain the desired level of lumbar support.
Backrest angle
F Release the bar to lock the seat in position
on one of the runners.
To Next Page
Loading...
