35
2
Acc ess
Electronic key with remote
control function and built-
in key
Remote control function
The remote control includes a conventional key
that allows the central locking/unlocking of the
vehicle using the door lock and the starting and
switching off of the engine.
Back-up procedures allow the vehicle to be
locked/unlocked in the event of a failure of
the remote control, the central locking, the
battery, etc. For more information on the Back-
up procedures, refer to the corresponding
section.
Integral key
The remote control can be used for the
following functions, depending on version:
- unlocking/locking/deadlocking the vehicle
and the fuel filler flap,
- unlocking – opening/closing the boot,
- remote switching on of the lighting,
- activating/deactivating the alarm,
- locating the vehicle,
- opening/closing the windows,
- closing the sunroof and the blind,
- locating the vehicle,
- activating the vehicle's electronic
immobiliser.
The key built into the remote control can be
used for the following operations, depending
on version:
- unlocking/locking/deadlocking the vehicle,
- activation/deactivation of the mechanical
child lock,
- activation/deactivation of the front
passenger airbag,
- back-up unlocking/locking of the doors.
Without Keyless Entry and Starting
With Keyless Entry and Starting
Unlocking the vehicle
With the remote control
F To unfold or fold the key, press the button.
F To eject the key or put it back in place, pull
and hold the button.
F Press this button to unlock the
vehicle.
Unlocking is signalled by rapid flashing of
the direction indicators for a few seconds.
Depending on version, the door mirrors unfold
and the welcome lighting comes on.
To Next Page
Loading...
