3
65
Ease of use and comfort
11. Access to the secondary page.
12. Passenger compartment pre-conditioning
(depending on version).
13. Selection of adjustment for the automatic
comfort programme (Soft/Normal/Fast).
14. Mono-zone/Dual-zone.
15. "AQS" (Air Quality System) function
(depending on version).
The air conditioning system operates with
the engine running, but the ventilation and its
controls are available with the ignition on.
Operation of the air conditioning and regulation
of temperature, air flow and air distribution
in the passenger compartment are regulated
automatically.
Temperature adjustment
The driver and front passenger can each set
the temperature independently of one another.
F Press one of the buttons 6 to decrease
(blue) or increase (red) the value.
1. Automatic visibility programme.
2. Recirculation of interior air.
3. Rear screen demisting – defrosting.
4. System off.
5. Air flow adjustment.
6. Temperature adjustment.
7. Air distribution adjustment.
8. Air conditioning on/off.
9. Maximum air conditioning.
10. Activation of automatic comfort
programme.
The value indicated corresponds to a level of
comfort and not to a precise temperature.
It is recommended that you avoid a difference
of more than 3 in the settings for left and right.
For maximum cooling or heating of the
passenger compartment, press the
temperature setting button down or up
until LO or HI is displayed.
Automatic comfort
programme
F Press button 10 "AUTO" to activate
automatic mode of the air conditioning
system.
When the indicator lamp in the button is on, the
air conditioning system operates automatically:
the system manages the temperature, air
flow and air distribution in the passenger
compartment in an optimum way according to
the comfort level you have selected.
It is possible to adjust the intensity of the
automatic comfort programme by choosing one
of the settings offered in the secondary page,
accessible from button 11 "OPTIONS".
To change the current setting, shown by
illumination of the corresponding indicator
lamp, press button 13 repeatedly until the
desired mode is displayed:
"Soft": provides soft and quiet operation by
limiting air flow.
To Next Page
Loading...
