7
EtherNet/IP Connection Procedure
7.4.3. Tag Registration
Import the created CSV file for use with Network
Configurator, and register tags and tag sets.
↓
7.4.4. Setting Connections
Set connections to associate the tag sets of the target
device with the tag sets of the originator device.
↓
7.4.5. Transferring the Tag Data
Link Parameters
Transfer the tag data link parameters to the Controller.
↓
7.5. EtherNet/IP Communication
Confirm that the EtherNet/IP tag data links are
performed normally.
↓
7.5.1. Checking the Connection
Status
Check the EtherNet/IP connection status.
↓
7.5.2. Checking Sent and
Received Data
Check that correct data is sent and received.
To Next Page
Loading...