CKD AX9000TS-U6 - Page 21

7
．
EtherNet/IP Connection Procedure
18
4
The dialog box on the right is
displayed.
Check the contents and click
OK.
5
AXTools starts up.
The figure on the right shows
the elements displayed in the
window.
- Tab
- Ribbon Menu
- View
6
Select the Set Tab.
The View of the Set Tab is
displayed.
Select Field Bus setting from
the Ribbon Menu, then select
EtherNet/IP setting.
7
The EtherNet/IP register Dialog
Box is displayed.
Set the following parameters.
IP address: 192.168.1.2
Subnet mask: 255.255.255.0
Click Set (ABSODEX).
View
Tab
Ribbon Menu