7
EtherNet/IP Connection Procedure
4
The Import Connection
Configuration Dialog Box is
displayed.
Select EIP002.csv and click
Open.
*"EIP002.csv" is the file
created in step 7 of 7.3.2.
Setting Global Variables.
*If you have opened the Tag
Sets Tab Page (not
Connections) and have
perform steps 2 to 4, the
dialog boxes (1) and (2)
shown on the right will be
displayed.
Simply follow as below.
The dialog box (1) is
displayed. Confirm that there
is no problem, and click Yes.
The dialog box (2) is
displayed. Confirm that there
is no problem, and click No.
*Do not automatically
create a tag set from the
tags you import.
Dialog box (1)
Dialog box (2)
Click the Tag Sets Tab in the
Edit Device Parameters Dialog
Box.
Click the In - Consume Tab,
and then click Edit Tags.
*Follow steps 5 to 12 to create
and register an input tag set
of Controller (Node 1).
To Next Page
Loading...