7
EtherNet/IP Connection Procedure
4
The Monitor Device Dialog Box is
displayed.
Check that the following check
boxes are selected on the Status 1
Tab Page.
・On-Line
・All Tag Data Link
・Tag Data Link
・Ethernet Link Status
Check that the target node status is
displayed as shown on the right.
Click Close.
Select Disconnect from the
Network Menu.
Check that the color of the network
connection icon changes to grey on
the EtherNet/IP_1 Tab displayed in
the Network Configuration Pane.
*It indicates that Network
Configurator and Controller are
Select Exit from the File Menu to
exit Network Configurator.
Number: Node number
Blue: Connection normal
To Next Page
Loading...