Applications
Mono subwoofer system (APX2180
and
APX4360)
In
this application, the rear channels are bridged for mono operation to drive a
subwoofer while the front channels are available to drive a set of full-range speakers.
Stereo Amp configuration (APX2180)
Set crossover mode to
LP
Set input mode switch to L + R (Mono)
• Set crossover frequency to
-80Hz
• Fine-tune crossover frequency to suit
musical tastes and performances
•
4Q
min
Stereo Amp configuration (APX4360)
• Set rear crossover mode to
LP
• Set input mode switch to L + R (Mono)
+.
Set crossover frequency to
-80Hz
• Fine-tune crossover frequency to suit
musical tastes and performances
•
4Q
min
Note:
You
may bridge the front, rear
or
both pairs
of
channels using the above
settings.
APXlDPX Amplifiers
15
Applications
Mono subwoofer system (APX2180
and
APX4360)
In
this application, the rear channels are bridged for mono operation to drive a
subwoofer while the front channels are available to drive a set of full-range speakers.
Stereo Amp configuration (APX2180)
Set crossover mode to
LP
Set input mode switch to L + R (Mono)
• Set crossover frequency to
-80Hz
• Fine-tune crossover frequency to suit
musical tastes and performances
•
4Q
min
Stereo Amp configuration (APX4360)
• Set rear crossover mode to
LP
• Set input mode switch to L + R (Mono)
+.
Set crossover frequency to
-80Hz
• Fine-tune crossover frequency to suit
musical tastes and performances
•
4Q
min
Note:
You
may bridge the front, rear
or
both pairs
of
channels using the above
settings.
APXlDPX Amplifiers
15
To Next Page
Loading...
Need help?
General
