Clarion APX4360 APX4360 APX4360 - Applications

APX/DPX Amplifiers 15
English
Applications
Mono subwoofer system (APX2180 and APX4360)
In this application, the rear channels are bridged for mono operation to drive a
subwoofer while the front channels are available to drive a set of full-range speakers.
Stereo Amp configuration (APX2180)
• Set crossover mode to LP
• Set input mode switch to L + R (Mono)
• Set crossover frequency to ~80Hz
• Fine-tune crossover frequency to suit
musical tastes and performances
• 4Ω min
FRONT
REAR
12V
+
REM
GND
FUSES
BRIDGED (4
+
+
--
RIGHT
LEFT
+
+
--
2
2
)
Stereo Amp configuration (APX4360)
• Set rear crossover mode to LP
• Set input mode switch to L + R (Mono)
• Set crossover frequency to ~80Hz
• Fine-tune crossover frequency to suit
musical tastes and performances
• 4Ω min
Note:
You may bridge the front, rear or both pairs of channels using the above
settings.
APX-DPXOwnersManual.pmd 2006-03-14, 21:4615